1 / 7
quick and dirty remix for MH-Z19 CO2 sensor and qtpy snap case — zdjęcie 1
1 / 7

quick and dirty remix for MH-Z19 CO2 sensor and qtpy snap case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

quick and dirty remix for MH-Z19 and SCD4x CO2 sensors and qtpy snap case. printed at high speed in eSUN PLA-LW 40% flow

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
1
Wyświetlenia
474
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

really bad quick and dirty remix for MH-Z19 CO2 sensor and qtpy snap case.

9mm squares plus MH-Z19 cut out of top and tall-frame, roughly centered to allow for either pin end used

 Printed at high speed in eSUN PLA-LW (235c 40% flow) which is now my favourite for prototyping as it prints like foam-board and is cuttable at this density ($33/kg makes it price equivalent taking 40% into consideration).

-Edit- Provided version for Cabled MH-Z19, which is offset by 4mm from the centered version

-Edit- Added shelf using Gravity Sketch, playing with SUBD modelling. After test fit there is space for an adhesive pad beneath the sensor, bringing it closer to the lid and securing it fully.

 

Model of MH-Z19 from grabcad by https://grabcad.com/thmjpr

https://grabcad.com/library/mh-z19-module-1