Corsair Carbide Air 240 HDD 120mm Fan Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount a 120mm fan to the HDD cage on the Air 240
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 857
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I built an Unraid box in this case, which had been sitting around for a while. Turns out the HDD's get very hot in there. After searching, I found no real solution. I designed this adapter that replaces the rear HDD cage cover, and allows you to mount a 120mm fan in exhaust or intake configuration to get some air flow over those HDD's before they cook themselves.
Given it's a mount to deal with heat, I highly recommend you print this in ABS, ABS+, or ASA. Check the screenshot of the build plate orientation, and the supports. I printed it with 25% infill, which should be good. You may need to drill out some of the holes for mounting, so I recommend going with 4 perimeters or more in your slicer settings.