1 / 3
Corsair Carbide Air 240 HDD 120mm Fan Cooler — image 1
1 / 3

Corsair Carbide Air 240 HDD 120mm Fan Cooler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to mount a 120mm fan to the HDD cage on the Air 240

Rating
0 / 5
Likes
8
Downloads
62
Makes
0
Views
859
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I built an Unraid box in this case, which had been sitting around for a while. Turns out the HDD's get very hot in there. After searching, I found no real solution. I designed this adapter that replaces the rear HDD cage cover, and allows you to mount a 120mm fan in exhaust or intake configuration to get some air flow over those HDD's before they cook themselves.

Given it's a mount to deal with heat, I highly recommend you print this in ABS, ABS+, or ASA. Check the screenshot of the build plate orientation, and the supports. I printed it with 25% infill, which should be good. You may need to drill out some of the holes for mounting, so I recommend going with 4 perimeters or more in your slicer settings.

Tags