Pipe Mounted Swivel for Multifunction Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swivel type mount to fit on a 3" (77mm) pipe.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I really liked the Multifunction Arm design by RostaP, and immediately found a million potential uses. I used a few of the models which they created along with my own special touch to create an articulating light mount system over my basement workbench. This also made me realize that I have basically created a super sized set of "helping hands" at my bench, which can now be adapted to hold tools etc. The Multifunction Arm, or boom, is now mounted to a swivel that directly clamps to a 3" pipe. I tried to simplify the design, and optimize for printing. There are only three parts to the model, and no supports required.
I designed this to use 4 heat set inserts, which accept 4 M5 bolts.