Liczymy pasujące modele…
Tired of your tool holders falling off your French cleat wall? Print out this FREE Swiveling French Cleat Lock that's super easy to print and install! I printed these in Prusament PLA Lime Green at a .2 layer height with 20% infill.…
I made a goal of designing a functional, fully 3D-printed caster that can swivel and lock the wheel. The wheel diameter is 4" so it's quite large. Although it actually functions pretty well, it won't be able to roll under much load. I did…
Neptune 3 and 4 Series Swiveling Filament Roller Guide I have created a swiveling filament guide for the Neptune 3 and 4 Pro-Series, as well as the Plus and Max models. This guide features a 50-degree swivel, snap assembly, and does not…
I converted my Ender 3 over to a direct drive system and rotated my spool holder 90 degrees. I wanted to take a stab at designing a filament guide that was print-in-place, but had a dynamic swivel component. Hole in the swivel is designed…
Added a tab to to the Rotary.stl to mount the filament sensor to the guide.
Used to connect a 3/4" pipe connection to an S60x6 IBC tank outlet. The 3/4" connection can rotate independently of the IBC connection, making it easy make things water tight even when the pipe needs to go in a specific direction. Print…
These are the lights I use for my work stations, as they are simple, flexible, and fast to make! This printed piece holds the light socket, easily mounts to things with double-sided tape, zip-ties, or screws, and allows you to swivel the…
See it in action in the below video! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids…
I've been needing an airbrush stand that can clamp on to my table in a convenient position and be at the angle I want it at. I looked around online (briefly) and came up with this. Fully screw the threaded bit of the holder into the small…
I created this Swiveling Hygrometer Holder to provide an attractive and functional enclosure for the type of hygrometer that is included with the Original Prusa Enclosure (and also available from dozens of vendors on Amazon, AliExpress,…
Attach this clamp to the edge of your desktop, swivel your speaker to any angle you wish, lock it into position, and ROCK OUT! Maximum speaker weight: 8.3 lb (3.8 kg) Print Settings: 4 walls (minimum) for .6mm nozzle 6 walls (minimum) for…
PLA/PETG/ABS all I have is a bobbin from SUNLU, maybe this could be useful for other bobbins too if you need a small bobbin for a little filament: https://www.printables.com/model/692879-mini-bobbin-filament
This model is an adapter plate for the Swiveling Filament Roller Guide by @ChrisEnders_798678 . The Filament Guid does not yet have the option of continuing to use the original filament sensor. This is what this adapter plate is for. The…
This is a holder for the Magic Eraser (standard/smaller-size) with a single-axis swivel that can be attached to a standard broom handle or extendable handle for out-of-reach areas. It comes as 4 separate parts: Eraser holder Threaded…
Swivel your desktop speaker to any angle you wish, lock it into position, and ROCK OUT! Maximum speaker weight: 8.3 lb (3.8 kg) Print Settings: 4 walls (minimum) for .6mm nozzle 6 walls (minimum) for a .4mm nozzle 15-20% gyroid infill…
This wall mount was made for Samsung 10.1" Tablets. Other models may work too. As my printer was too small, I made 2 parts with a groove to glue it after it is printed. You will need a M6 screw, M6 nut and some washers to put it together.…
Printed using PrusaSlicer standard PLA .20mm 100mms Linear Advance at 30% infill settings with supports everywhere.
The 0.01% is lubricant, the stuff provided by Prusa works fine. Build steps: Basically print the 3mf files in order, pause to insert parts for printing #2 and #8, and assemble. Use lubricant on the screw threads of the “long threaded…
This MagSafe mount features a swiveling mechanism that allows for 360 degrees of rotation and up to 30 degrees of tilt. Prints easily without any supports, and can be assembled with either magnetic inserts or non-magnetic MagSafe adapter…
Mechanism for locking a French cleat. Screw → rotate → done. Can be used as left or right This is a remix that modified original wing into a hook shape. hole: Ø 4 mm
I took myself the liberty to add a pilot hole (for easier drilling) to the modified rotary base part that @SanMatisse_5226 designed for the original filament swivel by @ChrisEnders_798678 . I've uploaded the exported STEP and FreeCAD…
NEPTUNE 3 AND 4 SPOOL HOLDER ADAPTER FOR THE SWIVELING FILAMENT GUIDE MADE BY Chris Enders @ChrisEnders_798678 The adapter replaces the original base for the Swiveling filament guide. I installed it opposite of the factory spool holder…
Tent Glow Pro: Illuminate Your Camping Experience The Tent Glow Pro is the ultimate camping accessory, designed to provide convenient and efficient lighting for your outdoor adventures. This innovative device securely hangs your phone…
I couldnt find it online, so I created it by myself. The distance for your hand is 100mm. The screw holes have a diamter of 4mm and a 45° chamfer with 9mm max. diameter. If you enjoy this design and it gives you benefit in your life,…
Improved version of Phil Caruso's modell with MAGNETIC stand to mount it almost everywhere (see pics). The hole is made for a max. magnet size of 20x5mm. If you use smaller magnet just glue it in. If you like it please do not forget to…
The original Description: Neptune 3 and 4 Series (Ender 3v3 se/ke for this remix) Swiveling Filament Roller Guide I have created a swiveling filament guide for the Neptune 3 and 4 Pro-Series, as well as the Plus and Max models. This guide…
There are items I wanted to mount on my Skadis peg board like power bars, battery chargers, small routers and network switches, but I didn't want to model some kind of bracket for each of them. Fortunately they all have keyhole slots on…
Depending on your printer it may also not work for max print height. Designed for M4 to extrusion and M3 to mount sensor.
With this holder for light barriers, the light barrier module can be precisely aligned with the respective counterpart to compensate for inaccuracies in the alignment. This allows the transmitter to hit the receiver exactly, even if the…
The Design Inspired by a mall functioning fidget (printed by an unknown stranger and smugled inside the house by my son) I designed this fidget toy. Printed in one go, and no supports needed. For a few links, I added some internal…
Swiveling filament pass through for feeding an enclosure from an external dry box. Accepts standard 1/8" NPT PTFE fittings and requires cutting a 32mm hole in the top of your enclosure. The swiveling mechanism prints in place and I…
Since I am using Octopi with a PS3 Eye Camera to monitor my prints I was forced to mount it somehow to the front of my 3D printer. As I have also planned to add a acrylic front door it should be able to remove very quickly in order to…
I modified the base so that i can mount it on my Ender 3 on top
You'll need to add a 1/2" ID / 1.125" OD ball bearing and a 1/2" OD steel spacer to the base and a 3/8" bolt through the wheel. Reuses stock spool bolts.
Height adjustable Webcam mount with g-clamp, printed knobs and caps. Mount designed for the Microsoft Lifecam HD3000. Update 13/10/2015: Added a new hanging clamp and angled bottom mount to the collection - these are for use on Delta…
Background I needed a secure way to attach my workshop vacuum to my miter saw and this is the solution. A swiveling adapter that is a friction fit in the dust extraction hole of a Makita LS1019 miter saw in one end and matches a Biltema…
Printed couple of the very nice PanelDue cases and wanted to have bit more mobility for the display. So designed this swiveling mount. Works a treat, allows rotating the display and tilting vertically. There are two versions of the swviel…
I wanted a holder for the filament sensor. My spools are very close to the side of the printer, therefore the holder had to swivel up and down. I found an igus-bushing that does the swiveling, although this is most probably overkill. A…
Print istructions PLA 0.6 nozzle 0.2 layer 3 perimetes 30% grid infill concentric bottom and top infill print orienting hose thread opening to the bed Assembly O ring 38mm ID, 3.5mm diameter Silicon grease Lube both O ring grooves on the…
I originally designed this swiveling holder to accommodate the shower-head in my van's sink. In its current dimension this is meant to fit: CAN FL1765 sink and stove Ibergrif M91209 spray head OFFO Shower Hose The concept is simple: pass…
Securely hold your Expo dry erase markers in a cap-down position so they are always primed and ready to draw! Gravity will ensure they are always held in the correct orientation. Does it need to swivel? No. Do I think the swiveling makes…
Mechanism for locking a French cleat. Screw → rotate → done. Can be used as left or right This is a remix that modified original wing into a hook shape. hole: Ø 4 mm
You'll need to add a 1/2" ID / 1.125" OD ball bearing and a 1/2" OD steel spacer to the base and a 3/8" bolt through the wheel. Reuses stock spool bolts.
