GU10 Swiveling Light Fixture (Print-in-place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Affordable, versatile, & bright directional lighting for workstations or photography setups
- Ocena
- 4 / 5
- Polubienia
- 56
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 824
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
These are the lights I use for my work stations, as they are simple, flexible, and fast to make! This printed piece holds the light socket, easily mounts to things with double-sided tape, zip-ties, or screws, and allows you to swivel the light to point in any direction.
These fixtures are built around GU10 LED bulbs which are cheap, energy efficient, last a long time, and can easily be found with 2700k color temperature and 90+ CRI (a nice warm light color for indoors.) In addition to the bulbs, you’ll want to buy the standard GU10 ceramic sockets, and you’ll want to be comfortable enough with electronics that you can wire them up to a 120v plug or circuit (or have a friend help here.)
These pieces also utilize bump-outs to create rotational friction so that when you angle the light it will tend to maintain its position. This rotational resistance might start out kind of tight/hard to rotate, but within a few days as the material creeps (under the constant load) it should settle into a more comfortable rotational resistance. PETG will perform a lot better here than PLA.
The “bridge supports” file utilizes a cool trick to print 'without supports' - the printer strings filament between two ‘walls’ to create a sort of tension bridge to print sequential layers on (which would otherwise be floating in mid-air.) After printing, these ‘suspension bridges’ can be easily clipped off.
I recommend printing with .3mm layer height and 20% infill with a .4mm nozzle from PLA or PETG (probably the most common printing arrangement!)
Thanks for checking this out!
If you make one of these, I'd love to see the results! Please note the updated V1.2, which should fix the fused axis issue.
If you want to see my other work and keep up with new releases, check out my website! If this project brought you joy and you want to support me, here are some ways you can :-)