Gridfinity dual-mode knife/tweezer bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holds hobby knife or tweezers either angled up for easy access or lying flat for stacking.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This Gridfinity-compatible bin holds a hobby knife or tweezers two ways: either standing up so they're ready to grab or lying flat so you can stack more bins onto it. You can even use both positions simultaneously with two tools.
The bin is 4x1x2 Gridfinity units in size: 168mm long, 42mm wide, and 28mm tall plus a 3mm lip. There are recesses in the base for magnet or screw mounting.
This was modeled in Fusion360. I've included STL, F3D, and STEP files.
Printing Instructions
Whatever you like. If you like the two-tone look, do a color change around 27-28mm.