Soldering Station RT1 Carrying Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
14,72 € – 18,00 € netto (bez VAT)
Dla pliku: Soldering_Station_RT1_Carrying_Case_0.2mm_PLA_MK3S_15h35m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 16,36 € netto (środek widełek).
- Masa podana przez autora
- 221 g
- Czas druku podany przez autora
- 15,58 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
It's a case i designed for the Soldering Station RT1 sold on tindie by PittiniHub.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case was inspired by my laziness to put soldering equipment away when i was done with soldering. It's designed for the Soldering Station RT1 sold on tindie by PittiniHub.
Link to product i use.
Parts
For assembly you will need:
2x M3.5x8mm screws for the lid lock
1x 122mm length of filament for the hinge pin
Superglue
2 rubber bands
For parts print the following:
1x box_part1.stl
1x box_part2.stl
1x box hook.stl
4x cornerhook.stl
Assembly
Glue the corner hooks to the inside of the top lid (used superglue).
Screw the securing hook to the top lid using 2 M3.5x8mm screws.
Connect the top to the bottom part using the 122mm length of filament.