1 / 6
Soldering Station RT1 Carrying Case — image 1
1 / 6

Soldering Station RT1 Carrying Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€14.72 – €18.00 net (excluding VAT)

For file: Soldering_Station_RT1_Carrying_Case_0.2mm_PLA_MK3S_15h35m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €16.36 excluding VAT (range midpoint).

Weight reported by the author
221 g
Print time reported by the author
15.58 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

It's a case i designed for the Soldering Station RT1 sold on tindie by PittiniHub.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
233
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This case was inspired by my laziness to put soldering equipment away when i was done with soldering. It's designed for the Soldering Station RT1 sold on tindie by PittiniHub. 
Link to product i use.

Parts

For assembly you will need:

2x M3.5x8mm screws for the lid lock
1x 122mm length of filament for the hinge pin
Superglue
2 rubber bands

For parts print the following:

1x box_part1.stl
1x box_part2.stl
1x box hook.stl
4x cornerhook.stl

Assembly

Glue the corner hooks to the inside of the top lid (used superglue).

Screw the securing hook to the top lid using 2 M3.5x8mm screws.

Connect the top to the bottom part using the 122mm length of filament.

Tags