Rotating Display Stand - Spray Booth Turntable 150mm (6")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating Display Base or Airbrush Spray-booth Turntable
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — NoDerivatives
Rotating Display Stand - Spray Booth Turntable
150mm (6") rotating display stand for miniatures or use as an extra spray booth lazy-susan turntable for spraying models
Utilises (x12) standard 5mm ball bearings used for model paint mixing.
Use a small 3mm screw or similar. I used (4gx9) to secure the top lid to the base. Just file out a small amount on the lid, if your screw is too tight. It should be loose through the lid hole.
I used a small amount of grease to assist the bearings. I placed a 150x3mm Acrylic round top on and are using them for a rotating display stand in my glass cabinet.
Don't forget to place some small ‘non-slip’ pads under the base and acrylic top (if using), to assist with friction support.
I printed at 0.28 as it only needs to be functional and this took just over 2 hrs for each half with CHEPS - FFV5.0-ExtraFast-028 profile.