Rotating Display Stand - Spray Booth Turntable 150mm (6")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rotating Display Base or Airbrush Spray-booth Turntable
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 83
- Makes
- 0
- Views
- 1,460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — NoDerivatives
Rotating Display Stand - Spray Booth Turntable
150mm (6") rotating display stand for miniatures or use as an extra spray booth lazy-susan turntable for spraying models
Utilises (x12) standard 5mm ball bearings used for model paint mixing.
Use a small 3mm screw or similar. I used (4gx9) to secure the top lid to the base. Just file out a small amount on the lid, if your screw is too tight. It should be loose through the lid hole.
I used a small amount of grease to assist the bearings. I placed a 150x3mm Acrylic round top on and are using them for a rotating display stand in my glass cabinet.
Don't forget to place some small ‘non-slip’ pads under the base and acrylic top (if using), to assist with friction support.
I printed at 0.28 as it only needs to be functional and this took just over 2 hrs for each half with CHEPS - FFV5.0-ExtraFast-028 profile.