The Perfect 3D-Printed Ball Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In a journey to make a model, I found there wasn't a good ball joint that I could use. This one is public domain!
- Ocena
- 4,5 / 5
- Polubienia
- 289
- Pobrania
- 941
- Wydruki
- 7
- Wyświetlenia
- 4480
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Public Domain
Hi friends!
This ball joint is designed to fit itself in a variety of material types at small and huge scales.
I am releasing it public domain so you may use and distribute it however you like. I hope it inspires you to make something!
I made this as part of another model that I was working on. I needed fully articulating legs and couldn't find anything I really liked. The complete model is going to be uploaded soon.
However, this part of the model I wanted to release as public domain so anyone can have it!
I have had a lot of fun with this one. This is the vertical orientation of the model. I am considering doing a horizontal one if someone is looking for something with a little more toughness.
They hold their weight at 100% scale and then about 50-100 grams depending on the shape you have them in.
I print them at 200 micron (.2mm) layer height with 3 perimeters. Infill does not matter.
It is recommended to use a brim, I use 3mm with a .15mm separation gap.
I have printed them with Silk and Matte PLA, as well as standard PLA. All work great. I went through many test prints trying to get them to snap fit without breaking. PETG will work a lot better, but I understand not everyone can print PETG so my focus was PLA.
I hope you have fun, and be sure to share what you create!