Hymer rear bumper left
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On my old Hymer motorvan the left cap for the rear bumper was lost. So I made a new one. second part to connect to…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 842
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
On my old Hymer motorvan the left cap for the rear bumper was lost. So I made a new one.
second part to connect to side bumper not done yet
(the model just fit a ender 3, you need to place it on the side connected to the metal bumper and turn it ~45 degree)
Part can be mirrored to get a right bumper cap
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,32
Infill:
20%
Filament: generic PETG silver
Notes:
my printing wasn't that succesfull, I had layers disconnected because of shrinking, maybe I should have used a cover for the printer and the base layer was so connected to the ender3pro magnetic base, so the base got destroyed :/
so do it better, maybe just use PLA- switch skirts, brims etc off, else it won't fit on 220x220 (you still need to lay it 45°)
- I used 1mm nozzle and 0,32mm layer height
- 3 walls, to get a very strong part
Category: Automotive