Hymer rear bumper left
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On my old Hymer motorvan the left cap for the rear bumper was lost. So I made a new one. second part to connect to…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 116
- Makes
- 0
- Views
- 842
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
On my old Hymer motorvan the left cap for the rear bumper was lost. So I made a new one.
second part to connect to side bumper not done yet
(the model just fit a ender 3, you need to place it on the side connected to the metal bumper and turn it ~45 degree)
Part can be mirrored to get a right bumper cap
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,32
Infill:
20%
Filament: generic PETG silver
Notes:
my printing wasn't that succesfull, I had layers disconnected because of shrinking, maybe I should have used a cover for the printer and the base layer was so connected to the ender3pro magnetic base, so the base got destroyed :/
so do it better, maybe just use PLA- switch skirts, brims etc off, else it won't fit on 220x220 (you still need to lay it 45°)
- I used 1mm nozzle and 0,32mm layer height
- 3 walls, to get a very strong part
Category: Automotive