LED Strip Light for Prusament Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED strip light holder for Prusament spool. Better used in Prusament Connect system. Moar spools, moar light! :)
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a LED strip light holder for Prusament spool (Better use in multiple instances in Prusament Connect, as spools are connected and produces more light.
It takes 30cm of LED strip for one spool. LED strips has doubletape surface on the back side.
The base is preferably printed in black PLA or PETG. It is a tight fit on spool.
Diffuser in for better light distribution, and it is supposed to be printed with transparent PLA or PETG. It is better NOT to be printed in PVA glossed in IPA, because, there will be no diffusing effect.
In the diffuser, there is a hole for four wires. Diffuser has a tight fit on the base, no glue needed.
It is needed to do a hole in the spool for the wires of the led holder, and notches for input and output wires for other holders to connect.
Its better to use LED strip connectors for this project. Its easier to assemble.
Print instructions
Easy print. No supports needed.