DROK DC Buck Converter (step-down regulator) enclosure- longer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the original version, I found the supports for the lid were in the way when trying to get the converter into the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
With the original version, I found the supports for the lid were in the way when trying to get the converter into the enclosure, but I was able to get it in with some forcing. Unfortunately I then found that there wasn't room for me to get it in when I had wires coming out of the converter. I have made the case longer, to make it easier to get the converter into the case, and to leave room for the wires. I made the holes larger, as I am using grommets in them. The hole on the input side is larger than on the output side.
Since I ended up having to remodel from scratch as I couldn't get Inventor to let me edit it how I wanted, I have included the new ipt fles, and I added some vents on the lid for fun.
Category: Electronics