DROK DC Buck Converter (step-down regulator) enclosure- longer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With the original version, I found the supports for the lid were in the way when trying to get the converter into the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
With the original version, I found the supports for the lid were in the way when trying to get the converter into the enclosure, but I was able to get it in with some forcing. Unfortunately I then found that there wasn't room for me to get it in when I had wires coming out of the converter. I have made the case longer, to make it easier to get the converter into the case, and to leave room for the wires. I made the holes larger, as I am using grommets in them. The hole on the input side is larger than on the output side.
Since I ended up having to remodel from scratch as I couldn't get Inventor to let me edit it how I wanted, I have included the new ipt fles, and I added some vents on the lid for fun.
Category: Electronics