1 / 4
Set of Xiaomi Mija mounts/ holders in vase mode
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
vase mode, 1 mm line width, fits Mija or other sensor with body 43x43x12.5 mm. Set of 4 mounts/holder
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 78
- Wydruki
- 3
- Wyświetlenia
- 462
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (0)Kolekcje (54)Powiązane
A quick design for practical Mija sensors. To be printed in vase mode:
- 1mm line width ,
- 0.25 layer height,
- 4 bottom layers,
- pay attention to volumetric speed with such wide line
Each mount can be used as free standing, although screw one has slot to accept screw/bolt head, adhesive one has flat surface to apply adhesive compound like tape or glue. Mounting slot is lower than the device to allow air flow through sensors slot.