Tinkertoy Sphere Game (Montessori-style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a half-dome full of slots for Tinkertoy rods
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new way to play with a Tinkertoy Construction Set. It's a half-dome full of slots to accommodate the wooden rods.
If you don't have any Tinkertoy rods, you can get a full set of replacement models here: https://www.printables.com/model/241063-tinkertoy-construction-set-replacement-parts
There are two versions of the model:
- R2, with angles of 30-60-90 degrees
- R3, with angles of 0-45-90 degrees
The fit should be good, but if it's too loose or too tight, try scaling the model slightly (< 1%). You can even try using a few of the half-domes, in different orientations.
For serious Tinkertoy projects, I recommend the 0-45-90 degree version, which is more like the angles of the other pieces. For an insert-remove dexterity game, the 30-60-90 is a bit more comfortable.
My entire model is parameterized, so if you'd like a variation (different base or slot sizes, angles, number of slots, etc.), just send me a message.