1 / 9
Triangle Lab TBG-lite DirectDrive mount for Ender 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triangle Lab TBG-lite DirectDrive mount for Ender 3
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Triangle Lab TBG-lite DirectDrive mount for Ender 3
This is a remix of b-lud's DD mount modified for the Triangle Lab TBG-Lite extruder.
Printed with tree supports in cura, normal supports in other slicers should work fine as well.
- BLTouch x_offset: -40.9
- BLTouch y_offset: -7.9
- 52mm bowden tube between the extruder and hot end setup for my current configuration. I would recommend inserting your bowden tube into the hot end, measuring it, doing the same with the extruder, then add them together + 6mm for the distance between. I left the BLTouch mount a bit short as I'm not certain if different clones and revisions have different OAL's. You will need a spacer, springs, or washers to suit your needs and preference.
I've been running this DD mount for a while now and have had no issues. Even running Klipper with fast print speeds, the extra weight hasn't caused any print quality problems.
The original bowden setup backing plate is used with this model. I have included that in the files as well just in case you need to reprint it or adjust the thickness to get the bowden section perfectly straight.
Printed in PETG