PokemonGo Plus Bike Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this after not finding any bike mounts for the belt clip, only the bracelet attachment. There are 4…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I designed this after not finding any bike mounts for the belt clip, only the bracelet attachment.
There are 4 different models to choose from, depending on the diameter of your handlebars and if you want to put rubber/foam tape between the mount and bars to keep it from slipping.
The 22.2mm will fit mountain bikes and most other bikes.
The 23.8mm will fit road bikes.
The foam versions are a few mm larger to accommodate the shim material.
After printing the 2 halves will need to be glued together. CA works great if used sparingly.
Then zip tie to your handlebars.
Category: Sport & Outdoors