EggFinder LCD & Missile Works T3 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
REMIX OF https://www.thingiverse.com/thing:5486467 Case designed to hold 2 Eggfinder LCD units and a MissileWorks T3
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Built around 4-40 Hardware
8x - 4-40 1/2" Phillips Pan Head bolts (for mounting LCD) (Use included printable spacers to properly stand teh board off the lid)
12x - 4-40 3/32" Hex nuts
8x - 4-40 3/4" Phillips Pan Head bolts (For Mounting GPS Board and Audio Board
2x - Twidec Latching Push Button Mini Switch, 3A 250V AC, 2 pin (for LCD on/off)
or
2x - Twidec Momentary Push Button Mini Switch, 1A 250V AC 2 pin SPST (for momentary LCD on/off)
3x - SS22F25-G5 2-Position DPDT 2P2T Panel Mount Mini Slide Switch Soldering Lug (for Power)
Runs of 2S 6500mAh battery with custom splitter cable so everything runs off 1 battery
Utilizes DC to DC Voltage Regulator to step down 7.4V of 2S lipo to the 4V the Missile Works T3 requires.
DC-DC Voltage Regulator: https://www.amazon.com/gp/product/B07WQJ2GD6/ref=ox_sc_saved_title_2?smid=A3JJM7S8SDXVXM&psc=1