Dodge 4.7 Throttle body adapter for 08+ intake manifold (not yet printed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the 08+ Intake manifold which is known to add ~20Horsepower over the pre-2008 Manifold.
Since the earlier models used Drive by Cable, and the 08+ use Drive by wire, an adapter is needed.
There are other CNC milled adapters on the market, but they are cost prohibitive and do not fit into my DIY mentality.
(Note: this is in no way shape or form meant to be a copy of the similar commercially available part designed by AirRam Performance - www.airram.com. This is merely my interpretation of a part designed to accomplish the same goal, however my design is a single piece and will utilize different hardware and attachment methods.)
Category: Automotive