1 / 3
Dodge 4.7 Throttle body adapter for 08+ intake manifold (not yet printed) — image 1
1 / 3

Dodge 4.7 Throttle body adapter for 08+ intake manifold (not yet printed)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the…

Rating
0 / 5
Likes
3
Downloads
95
Makes
0
Views
624
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the 08+ Intake manifold which is known to add ~20Horsepower over the pre-2008 Manifold.

Since the earlier models used Drive by Cable, and the 08+ use Drive by wire, an adapter is needed.

There are other CNC milled adapters on the market, but they are cost prohibitive and do not fit into my DIY mentality.

(Note: this is in no way shape or form meant to be a copy of the similar commercially available part designed by AirRam Performance - www.airram.com. This is merely my interpretation of a part designed to accomplish the same goal, however my design is a single piece and will utilize different hardware and attachment methods.)

Category: Automotive

Tags