Rochester MonoJet Base Gasket/Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hunk of plastic to put between the body of the carb, and the intake manifold to prevent heat soak, and help reduce…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A hunk of plastic to put between the body of the carb, and the intake manifold to prevent heat soak, and help reduce fuel boiling & Vapor locking.
This is just a representation of an actual phenolic resin spacer. I would reccommend using this at your own risk. No idea how Plastic will hold up compared to the phenolic resin that is used in production spacers.
I printed this one at 1/4 inch height to match what was there before, but depending on the length of your carb studs you may need more/less.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.02
Infill:
60%
Filament: Overture PLA Pro. ABS OR PETG WOULD BE BETTER! Black
Notes:
Printer at .02 layer height. 100mm/s
Nozzle temp 210℃Bed Temp 70℃
Category: Other