Rochester MonoJet Base Gasket/Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hunk of plastic to put between the body of the carb, and the intake manifold to prevent heat soak, and help reduce…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A hunk of plastic to put between the body of the carb, and the intake manifold to prevent heat soak, and help reduce fuel boiling & Vapor locking.
This is just a representation of an actual phenolic resin spacer. I would reccommend using this at your own risk. No idea how Plastic will hold up compared to the phenolic resin that is used in production spacers.
I printed this one at 1/4 inch height to match what was there before, but depending on the length of your carb studs you may need more/less.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.02
Infill:
60%
Filament: Overture PLA Pro. ABS OR PETG WOULD BE BETTER! Black
Notes:
Printer at .02 layer height. 100mm/s
Nozzle temp 210℃Bed Temp 70℃
Category: Other