393 models
GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
allows you to use your Proxxon Micromot 50/E as spindle for the Alfawise C10 engraving machine. The adapter has a 45mm outside diameter and might also fit other engravers. There are two adapters which can be used independently. One mounts…
This simple print can replace the factory sway bar links for the Team Associated Pro4 SC10 (and Rival MT10). I found the factory links tend to fall off pretty easily, especially on the rear. Unfortunately, you can't buy just the links…
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Print: For a multi-color print (as in the example photo), three layers are needed for the “Cover”. The heights of the layers are: 1mm, 2mm, and 1mm. Assembly: The slit for inserting the cover into the main part is exactly as wide as the…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
Recreation of the Chevy Silverado C10 Emblem (1982)
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
Here is a pretty nice '72 Chevy to add to your collection. Printing it is approximately the same procedure as my other Hot wheels models, I printed with a 0.2mm nozzle, but that's because I suck at sanding out the layer lines lol. Use…
Replacement base for TP-Link Tapo C100/C110 Cameras. I got a good deal on several of these cameras, but they were missing the bases, so I designed and printed some. I used Polymaker Polyterra PLA Cotton White just because it's matte and…
Original Quadra-symmetric RC10 project page: https://www.rc10talk.com/viewtopic.php?f=35&t=38327 ----------------------- PRINTING: Print the parts in upright position with the hinge pin and shock mounting holes pointing up. This way pin…
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
For the right-hand side of printer. May work on the left if you mirror the stl in your slicer before printing.
RC10 Gold Pan Rear Wheel 12mm Hex Adapters in various sizes. Allow you to fit cheap aftermarket wheels to the rear of your RC10. I saved them in various size thickness. I am using the 5mm thick ones on my RC10 with some cheap aftermarket…
Flashforge Adventurer 5M Mount for the TP-Link Tapo C100, C110, C101 Camera. I made this one as there was no way to put my C101 inside the enclosure, and I didn't want it attached to the door. This mount is designed to work even with a…
I used that case for filament dryer Need: 3x screw and nut M4 https://aliexpress.ru/item/32431995668.html Set2
The camera for the P1P and P1S is mostly useless and is more of a time lapse still camera than a video camera, this allows you to use a tapo C100 for a real time camera and still keep the built in camera. It mounts on the glass for the…
As I wanted the base in a different color than white, I made this from the original model. This model use the same distance for the screw holes as the TP-Link original mount. I made 2 versions with different tolerances, as the original…
Another featherboard designed for Bosch GTS XC10 srews M5 and M6 added new knurled srew knobs and a smaller version of the “Nutenstein angle braket V2” design files:…
The perfect camera mount for the Snapmaker U1 leveraging the mounting point for the U1s tophat. Since the mount is rubberized it also provides some vibration protection. Tapo C110 (2k) - https://amzn.to/3M1R4Lc Tapo C100 (1080p) -…
This Case is to safe your Tapo C100 Indoor Webcam from Dust and Rain. The picture is from another Reddit user, because i forgot to take a picture of my model when i uploaded it. I already asked him if i could get the Stl but he didnt…
Housing for a REX-C100 Temperature Controller with switches to shutdown the controller or interrupt the SSR relay, while keeping the controller running. Rear is cutout for a housing Schuko socket from PCE, 20mm opening for a cable gland…
Eine c10 karosse für ein exreal chassis. kann auch für andere Rahmen verwendet werden. original version: https://3dwarehouse.sketchup.com/model/25627aff4197b7b2868c4d0955275407/1971-Chevy-C10?hl=sv Support thread:…
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
A simple weatherproof enclosure for the TPLink Tapo C100/C110 WiFi security camera. I made this so I can watch the various neighborhood cats come in and out of our yard and to check on Meggy, the feral cat that we look after, who this…
Wings to be able to mount a Cisco C1000 into a standard 19" rack. I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic…
This is a slim shell to fit the internals of the Tapo C100 camera (except the speaker). The idea is to be able to fit it in narrower spaces. All faces are flat so would be easier to make different mounts for it, e.g. for 3d printer, etc.…
As it can be to thin for your tastes, do not hesitate to remix it with thicker walls ! And to be sure that the PID will stay in place, I placed two bands of “unfolded”vdouble sided tape between the PID and the support. Used this model for…
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
Remixed from: https://www.prusaprinters.org/prints/45286-tp-link-tapo-c100-mount https://www.thingiverse.com/thing:3987496
LEGO Chevrolet C10 Pickup - 1964
I added two holes to screw it against the wall and I also removed the holes for the rubber feets Printed with: 4 Walls 20% infill (Grid)
Really liked the looks of capze 's design, but needed a way to securely and universally mount the camera to any current and future projects, and felt like it could be even thinner. The original STL was hard to make precise changes too, so…
UPDATE 24.11.2023 Added a second version of the model with stronger, tighter fit and that now uses 2 of the V-Slots. This way you can put more pressure on the camera (for example when orienting it) without it coming free of the rail.…
Makita Battery Charger DC10SA & DC10SB: This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger. It fits with the Makita DC10SA and B. print setting: PETG (but PLA should also work)…
Print Instructions & Recommendations: No support or any other post processing is needed with current orientation . 3MF file prepared in PrusaSlicer is also included. Assembly Instructions: No additional material is needed for the…
Update: added a M3 version which will fit screws from M3 x 6 to M3 x 10. Make sure to not tighten the screws all the way as this may brake the pillar on the bottom lid and isn't even necessary. Hello there! I was looking for a simple…
I've been looking around for a mount for my tapo cameras and I wasn't quite finding what I was looking for, so I'm going to be building my own. I also couldn't find any specs on the dimensions of the mounting holes on the base of the…
3D scan of the TP-Link Tapo C100 security camera. I took this in order to help design a mount that attaches to the front of the camera. The lens had to be covered in tape in order for the scanner to work correctly but the rest of the scan…
This is a higher-clearance bumper for the SCX24 C10. It honestly primarily looks cool, but also adds a rear hitch option to go with the 3d printed trailer I made: https://www.thingiverse.com/thing:4806919 I designed it based on similar…
For C100 and C110
A simple mount that adds magnets to the base of a Tapo C100 or C110 camera. The pegs on this mount fit into the mounting holes on the base of the camera, and the other side of the mount is sized for a 10mm x 3mm circular magnet . I put a…
For c100 and c110
This mount is made for the TP-Link Tapo C100/110 camera in combination with a Creality Ender 3V2 3D-Printer. The mount is screwed with two M5 screws onto the existing y-axis belt tensioner. You will need to swap the original screws, which…
Cover to hide the white parts of the Tapo C100. Print without support. You may need to orient the parts properly. The parts should be press fit. No glue needed.
Bird feeder with insert to add a Tapo C100 camera Print with support for camera support and main feeder. M3 screw is used for assembly. I use Frigate to analyse the camera flow and detect birds.
Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…
2024.06.01 update V2 - Better socket for camera. Really liked the original model, but i have Tapo Cameras at home, so i modified the model a bit, this way it can hold now Tapo C100 or C110 cameras.
Introduction I wanted to reuse my budget-friendly Tapo C110 camera, which I originally bought for the MK4, with my Prusa Core One. This custom case allows for easy mounting in one corner of the printer, similar to the Buddy3D camera…
Quick and dirty mount for the Tapo TC60 (Amazon version) or C100 camera, wanted to quickly mount it in the corner of our puppies crate. We use this to check on our puppy while he's in his crate as we cover it. It has been up for about 3…
This is a higher-clearance plate-style front bumper for the SCX24 C10. It does require trimming the front of the body under the grille. Front body lift post mounts will lift the front body up higher and has a spot to superglue in…
The camera holder attached to the Centauri carbon glass door using the two screws on the top hinge. The housing is designed to reuse these screws so that no extra hardware is required. There are two versions of this model, a clean version…
I have a canvas enclosure around my printer whose frame is made from 17 mm steel tubing. I use a Tapo C100 webcam to monitor my prints, so I designed a bracket which clamps onto that tubing, and has a socket for the ball-joint on the…
Allows you to use modern 12mm hex wheels with the Original RC10 and RC10T Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: .09 Infill: 100 Post-Printing Some sanding required depending on accuracy…
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
Tapo camera mount. Mount as you need: double-sided adhesive tape, magnets, screws, cable ties, zip ties Magnets holes - 10 mm outer diameter, 5,2 mm deep
The mount has an exit port for the barrel connector. The back is open (for microphone & speaker), and the SD slot is accessible. Camera can easily be removed, tested with C110 (C100 should probably work). I tested only the 5° tilted…
I wanted to youse a Miele Brush extention, now i can do it :-)
To be printed with Prusament PETG 0.2 QUALITY 20% infill
A switch panel blank for the awkward shaped fixings either side of the heater controls on earlier (non-satnav) Landcruisers. It may fit other toyota/lexus models? Let me know if so. This is for the LH (passenger side in UK/Aus/Japan) - if…
This is a bumper for the C10 it mounts with the holder onto the stock screws, wich hold the headlights. I made it as close as i get it to the RC4WD bumper as i could get it. The holes fit 1/10 rc lights. They just need a little sanding,…
Place on the side with the cable guide up. Use support Prints well with PETG and standard settings on a MK4 or an XL. You might want to secure the cable with zip ties
This parametric boom extends the length of the standard camera mount by any size you want. The parametric OpenSCAD model allows setting the length and fine-tuning parameters as needed. …or simply use one of the STLs I've rendered for you.…
Original RC10B2/B3/T3 Graphite project page: https://www.rc10talk.com/viewtopic.php?t=32679 You will get good quality and strong printed parts if you order them somewhere SLS printed in PA12 material. MJF will work nicely also. All carbon…
These custom 5-spoke wheels allow the use of modern Traxxas Anaconda 2.2" tires, front and rear , on the original RC10 gold pan RC car. The front wheels accept the stock bearings/bushings, and the rear wheels fit onto the normal rear hub…
Requires pair of two. Simply hooks in the air vent. Print in any material available. Dimensions can be adjusted to fit your phone (if needed) using the OpenSCAD file provided. Holders can be easily be removed, stored, and re-deployed in…
Attachment of the Tapo c100/110 camera to the Skadis board.
Hikoki/Hitachi/Metabo C10RJ to Bosch Universal Vac 15 vacuum port adapter Print in PETG
Disclaimer: No guarantees on whether this fits your particular saw, but it fits mine “good enough”. Since my print bed is not big enough to print a full insert in one piece, this is broken up into two halves with some joiner pieces. I've…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
An angled bracket allowing you to mount a Tapo C100 or C110 to a wall or other vertical surface. You can either have the camera platform face upward or forward - either will work. The pegs on the bracket fit in the mounting holes on the…
Model and G code for these handy castor cups for the TC100 gaming chair or any other chair with 66mm dia x 55mm wide castors. Great for stopping your gaming chair sliding around on laminate floor. You can also add some non slip mat…
You'll also need 8x3mm Magnet x2 CA/Super/Instant glue for plastic parts Epoxy or other glue for magnets Instructions - Print camera plat and glue helper part flat, print the clip on its side - Use more perimeters for the clip, e.g. 4 -…
Thank @3DSourcerer and @BiTN_84310 for their ingenious designs - I only mixed @BiTN_84310 's C100 GoPro mount with @3DSourcerer' s awesome Bu Stik mounting system :) So, a dirty Tinkercad remix to mount my Tapo C100 camera on the Bambu…
Replacement tappet plate for airsoft MP7, VZ61, and MAC10. Some filing may be needed Update 12/28/18: Edited to better mimic original tappet plate Category: Sport & Outdoors
This friction fits my Hitachi C10FCE and my ShopVac hose. I have noticed there are some variations in different models of hoses. This should allow you to fit any type of round hose to the C10FCE, just change the measurements for the…
3mm holes for mounting the holder to the frame. Twist in T nuts can be used: https://www.printables.com/model/578512-t-nuts-8mm-slot M4 countersunk head screws for mounting the camera. V2 Increased distance to the print bed for a better…
Fits well. Does not include anti-roll bar pivot. No supports needed. Print Settings Printer: MPMiniDelta Rafts: No Supports: No Resolution: .07 Infill: 100 Filament: HobbyKing PLA Black Post-Printing ============= Run a 1/8th drill bit…
This basic mount allows to attach Tapo C100 camera with any original camera parts modifications. Camera is positioned upside down but it is possible to rotate the image by 180 degrees when camera is beeing used in Octoeverywhere.
I wanted some way of monitoring longer prints even during night without leaving the lights on, so I bought Tapo C100, which is IMO great for 3D printer monitoring. However I did not find any suitable holder for Anycubic Mega S, so I…
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
Mixed the two models (Sunglasses holder (for Honeycomb Storage Wall) by DusBus https://www.printables.com/de/model/259509-sunglasses-holder-for-honeycomb-storage-wall/comments and TP-Link Tapo C100-110 Camera Mount For Creality Ender3V2…
Suporte Base P/ All In One Positivo Union C1260 C1000 K3230
A case to keep my iem cable tangle free. The model is not perfect. As you can see in the images I drilled a small hole on the side to insert the 3.5mm jack so the cable stays in place when wrapped around. Insipired on…
A streamlined, simple mount designed to perfectly align the Tapo C110 camera with the top rails of the Prusa XL, ensuring a seamless and secure fit. Material: PETG 30% Infill Supports on build plate only
RC10B7 Front Tower Protector. I printed it in 98A hardness TPU at 100% infill.
Tapo c100 very slim camera case from TP-Link. The camera includes a Gopro mount on the back and a small rain cover. Splited into several parts for easy printing. The individual parts contain small holes for threading the filament through…
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
Using Fusion 360, I made an RC10 Gold Pan model to be a display piece. Used hot glue to put the static pieces together, and 1.75mm filament for joints. https://www.youtube.com/watch?v=RTKm58JL5iU&t=8s
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
A la base dessiné pour un ami, maintenant je le partage ;) Bonne impression.
This is a remix of the REX-C100 case mount by GreySID. I have made the following changes which were more suitable for my needs; The four mounting holes in the corners have been increased from 4mm to 6mm diameter to accommodate larger…
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
This remix ensures a good attachment of the camera to the frame of a Sovol SV06.
These are recreations of the original 3-spoke wheel nuts that came with the Team Associated original RC10 gold pan. They look great in black PETG to match my new Anaconda wheels : Each wheel nut is actually made of two pieces, the main…
