Deity Connect Duo-RX Adjustable Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height Adjustable Belt Clip system for the Deity Connect Duo RX
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
I created this height adjustable belt clip system for the Duo RX for it to clip into sound bags that have elastic loops rather than velcro.
The position of the clips can be set and locked so it sits at the right height in your sound bag. The plate locks into the ¼ 20 threaded hole with a centering pin going into the 3/8 hole.
The metal clips are money clips that press fit into slots in the print. They can be found here:
https://www.amazon.co.uk/gp/product/B07SPCMQDN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
You will also need a ¼ 20 bolt that is 8mm long.
Printed in PLA+
30% infill
0.2mm resolution
3x perimeters
No supports