Dry Box Filament Bulkhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic filament bulkhead for building a dry box. Inspired by the many variants available on Thingiverse, I wanted a…
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 1966
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Generic filament bulkhead for building a dry box.
Inspired by the many variants available on Thingiverse, I wanted a simple bulkhead to guide my 1.75mm filament out of my dry box. I came up with a few variants while experimenting with both 1/4" and 4mm tubing, but settled with the 50-degree, 1/8"-NPT version.
I have included models for 45 and 50 degree variants for both 1/8" NPT and 1/4" NPT tubing fittings.
The mount pattern is designed for M3 hardware spaced 30mm apart. The filament is centered directly between these holes.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm Layer, 0.4mm Nozzle
Infill:
20%
Filament: esun PETG Natural
Category: 3D Printer Accessories