Improved model stands for Openscan Mini turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
- thinner shaft - Angular keyed cut outs - better fillets
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made three changes but kept overall dimensions:
- thinner shaft as stock was thick enough to rub on the rotor during operation
- Angular keyed cutouts for the stepper motor shaft to fit into, which should stop spinning in place.
- better fillets as the stock ones were kinda abrupt and ugly (!) this should also strengthen the transition areas between slopes.
TIP: Print One test first to see if you need to scale model up/down in your slicer to get a good fit. My prints as-is with a little force to get on and a satisfying "pop" when you pull off.