1 / 3
Improved model stands for Openscan Mini turntable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
- thinner shaft - Angular keyed cut outs - better fillets
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Made three changes but kept overall dimensions:
- thinner shaft as stock was thick enough to rub on the rotor during operation
- Angular keyed cutouts for the stepper motor shaft to fit into, which should stop spinning in place.
- better fillets as the stock ones were kinda abrupt and ugly (!) this should also strengthen the transition areas between slopes.
TIP: Print One test first to see if you need to scale model up/down in your slicer to get a good fit. My prints as-is with a little force to get on and a satisfying "pop" when you pull off.