1 / 5
70 series Landcruiser TP8100 Tait radio mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Tait radio mount for a 70 series Landcruiser. Made for work vehicles on a mine.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 992
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
We needed a in vehicle mount for our work vehicles and radios. I used some of the existing switch holes in the dash that weren't being used and made my own mounting plate.
I used two m5 machine screws and 8mm nuts to mount the cradles to the base.
Printed with prusament PETG as it is in a vehicle and exposed to the sun and heat. I have also used ESUN PLA plus with some units lasting over a year now.
I printed mine with the .3mm draft defaults.
.4mm/.6mm nozzle
3-4 walls
3-4 top or bottom layers
20% grid infill