Liczymy pasujące modele…
This phone stand came about after my original Print in Place credit card sized phone stand became popular. The most common request I got was to make a more robust version, which allows the phone to sit in portrait and has room below it to…
3D Printed Inhaler Holder I made 2 inhaler canister holders, the first is a regular holder and the second is a miniature 'fast print' inhaler. The fast print inhaler can be made in an emergency, this version takes 5 minutes to make [using…
Covers for an Arduino Uno and Leonardo. Important parts are exposed and the rest covered up [to prevent dirt build-up, accidental shorting or liquid spills]. Designed by: https://www.taito3d.co.za Instructions Print without support.
This is a remix: https://www.thingiverse.com/thing:398614 I used SketchUp to design the file. The windows made out of clear filament. I've grouped the windows together, so please explode them from the rest of the design. I used a…
A set of clamps that can be used to fit an aftermarket display to a Taito Vewlix arcade machine. The monitor I used was a LG 32GN550. Other similar LG monitors may fit. If you print them and find out yours doesn't quite fit then let me…
Mounts to fit 2x Brook UFB PCBs and one JVS-PAC2 to a Taito Vewlix arcade cabinet. Vewlix_Fast_IO_Brook_UFB_Mount_V3.stl fits the K91X1204A Taito FAST IO. Vewlix_JVS_IO_Brook_UFB_Mount_V2.stl fits the K91X1097B Taito JVS IO.…
Support / display brackets for working on or displaying a Vewlix control panel. If working on the rear of the panel then slide it into the throat of each bracket. If desired, M4 nuts can be used to clamp the panel to the bracket but it's…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Print at 0.2mm layer height. The base plate is 1.4mm heigh. So start your colorswitch above that. Coloring the eyes has a really nice effect. I did this in the base plate. The picture has a brim firmly attached to prevent warping. Cut it…
We needed a in vehicle mount for our work vehicles and radios. I used some of the existing switch holes in the dash that weren't being used and made my own mounting plate. I used two m5 machine screws and 8mm nuts to mount the cradles to…
Printed in PLA, 100% infill. Unscrew the current mounting plate from your joystick and fit the adapter plate using the same screws. The joystick can be then screwed to the Vewlix CP mount using the standard M4 screws. Compatible with the…
Adapter plate to allow a Seimitsu LS-32 or LS-32-01 to be fitted directed to a Taito Vewlix control panel. Once fitted, the CP > underside ball distance is approx 24.5mm. The standard SE or SS mounting plate can be removed and the printed…
This adapter increase the diameter grip from the original, to 45mm. It can be printed with your favorite materials without supports. Doesn't need screw or other things... just print and it fit over the original. Category: Other
Mounts to fit a JVS-PAC2 to a Taito Vewlix arcade cabinet. Holes modelled to fit M3 threaded inserts. Use M3x8mm CSK bolts to fit mount to IO tray. Use M3x8mm bolts to fit the JVS-PAC2 to the mounts.
Mount to fit a OREI HDMI Audio Extractor to a Taito Vewlix arcade cabinet. Two versions uploaded, one with an additional mount to fit a DC 5V Delay Relay Shield NE555 Timer Switch Module. The mount fits to the existing bolts in the…
2 parts, No Support Easy to print and assemble
Corsair Capswap with Corsair logo is printable with only one filament (single piece), better if it is a trasparent one to allow light passage. Verified stampability under 2h with MK4S.
VENTURE FAMILY FRAMED PORTAIT WALL ART
Taito Game illuminated 1x COB LED Strip Natural White with remote control 1x DIY MINI MICRO USB Adapter Type B Female DIP 1x Micro USB Type B 5 pin male connectors 2x M2x6 4x M4x12 If mount on the support 2X M4x20 Category: Other
PcDuino V2 Case Designed by: https://www.taito3d.co.za Instructions Resolution: Medium Setting Support: Yes Place the buttons inside the case and close it.
Un petit passe câbles pour éviter que les fils ne se mettent partout. Là on peut ouvrir et fermer la porte du monnayeur
Cette câle est parfaite pour ajuster la hauteur des joystick Sanwa JLF sur les Chewlix. Elle peut même s'adapter à d'autres bornes d'arcade. Pensez à utiliser des vis à tête conique M3 de 16mm.....Et aussi à retourner la pièce sur Cura…
Container made to store small electronics components [switches, capacitors, resistors LEDs etc]. Small Container: 30mm x 27mm x 15.5mm Larger Container: 40mm x 27m x 15.5mm The slot on top allows you to see what's inside the container or…
I loat the original barend of my Taito, so I made a replacement out of clear PETG. I fiddled around with the settings and came up with th following: Bone dry filament (I let it dry overnight in a food dehydrator at 50C) 2 perimiters…
This is a Taito Egret 29 arcade button. On the Egret 29 there are two cutouts for card readers but most are not populated with anything. This print is to populate the smaller of the two cutouts with a button that you can rewire however…
French version of Once Upon A Time… This bookmark is easily printable, uses very few filament and takes around 10-15 minutes to be printed.
Poloh Name Tag Designed by: https://www.taito3d.co.za Instructions Resolution: Medium Setting Support: NO
Retrofitting a replacement LCD in the Battle Gear 4 cabinet is challenging since all access is from the front, with no rear access available. This mounting system consists of two parts: the cabinet-side mount and the monitor-side mount.…
Replacement latch/hook to lock Taito Arcade Cocktail Table
I bought a Taito arcade cabinet to restore. While looking for parts I kept seeing pictures of the original machines with a “Taito” logo on the coin door. Sadly mine had been removed before I got the machine. I whipped up a quick version…
Case for a Taito G-Net Arcade PCB! Requires: 5 - m3 x 5.7 threaded inserts 5 - m3 x ~16mm screws Optional (If using Everten Stereo PCB): 1 - 10mm x 6mm female-male brass standoff (Included with Stereo PCB) I printed at: Main Case: 0.2mm…
If your plastic bezel is sagging due to the screws breaking the the old plastic posts then this print is for you. These screw savers replace the old screw posts (all three different styles). These fit and work without glue but you can…
The stock fenders on the Taito electric scooter are fairly weak. The designers of the scooter are working on a replacement, but I couldn't be bothered waiting so I reverse-engineered my own. Attention: the mudguard in the picture is the…
J'ai créé ces supports pour éviter de rayer le sol à la maison. C'est nickel un avec un morceau feutrine autocollante.
