Dual grip arm for cylindrical objects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed for a very specific purpose: to hold two miniature torches pointing at an electrolysis cell at an…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This was migrated from my Thingiverse profile and is from 2015/2016.
This was designed for a very specific purpose: to hold two miniature torches pointing at an electrolysis cell at an angle from the sides to allow video recording of the electrolysis cell without the torches shining directly into the camera.
I imagine it could be used or adapted for other purposes: just change the parameters in the .SCAD file.
You will need additional bolts/screws, nuts and washers as seen in the pictures...
Print Settings
Printer Brand:
RepRap
Printer:
Ormerod 2
Rafts:
No
Supports:
No
Notes:
PLA standard settings
How I Designed This
Designed in OpenSCAD, sliced with Slic3r.