Remote Control Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and modular remote control holder
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 196
- Wydruki
- 2
- Wyświetlenia
- 1648
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I have been looking for an easy way to organize my "small" remotes. Since I didn't find anything useful, I created and printed my own remote control holder in Fusion 360.
It was important to me that the holders can be plugged into each other to keep several remotes together in one spot. The individual modules can also be easily taken apart again and put together in a different order. I also made a little video about it:
I uploaded the STL files for the remote controls I use myself, but there is also a STEP file available. With this you can adjust the size of the holder as you like. I recommend a small play of about 1mm per side, so that the remote control is easy to insert.
I hope someone can do something with it.