Y belt tensioner for Graber i3 with F623ZZ bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a smaller profile version of the zegmonteiro's "Y Belt Tensioner for RepRap Graber i3". Yes, i still have a…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a smaller profile version of the zegmonteiro's "Y Belt Tensioner for RepRap Graber i3". Yes, i still have a graber i3 and it always need some fixing. I tried the original tensioner, but find it to bulky for my printer body. And it never aligned proberly due the larger beagring. I had some spare F623ZZ bearings and decided mix the overall structure of the original tensioner with the x belt tensioner from MazaaFIN's "Smooth X-axis for Prusa i3 with Leadscrews". It worked quite well to me.
To use this you will need:
2 F623ZZ (3x10x4) flanged bearings
2 M3x10 or M3x15 bolts
2 M3 nuts
1 M4 bolt
1 M4 nut
3 M3 washes
I strongly recommend glue the spare M3 wash on the printer body, right where the bolt point hits, so you dont pierce it over time.
Also included, dont know why, is a long cap with space for two M3 nuts and screws. I believe this can be usefull to align the tensioner in case of need.
Print Settings
Printer:
Graber i3
Rafts:
No
Supports:
No
Resolution:
1,5
Infill:
i used 30, but 20 or 15 should be ok
Filament:
n/a abs
n/a
Notes:
if you print fast engouth (i printed mine about 60mm/s) you wont need suports
Category: 3D Printer Parts