1 / 6
Y belt tensioner for Graber i3 with F623ZZ bearing — image 1
1 / 6

Y belt tensioner for Graber i3 with F623ZZ bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a smaller profile version of the zegmonteiro's "Y Belt Tensioner for RepRap Graber i3". Yes, i still have a…

Rating
0 / 5
Likes
4
Downloads
21
Makes
0
Views
211
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a smaller profile version of the zegmonteiro's "Y Belt Tensioner for RepRap Graber i3". Yes, i still have a graber i3 and it always need some fixing. I tried the original tensioner, but find it to bulky for my printer body. And it never aligned proberly due the larger beagring. I had some spare F623ZZ bearings and decided mix the overall structure of the original tensioner with the x belt tensioner from MazaaFIN's "Smooth X-axis for Prusa i3 with Leadscrews". It worked quite well to me.

To use this you will need:

2 F623ZZ (3x10x4) flanged bearings

2 M3x10 or M3x15 bolts

2 M3 nuts

1 M4 bolt

1 M4 nut

3 M3 washes

I strongly recommend glue the spare M3 wash on the printer body, right where the bolt point hits, so you dont pierce it over time.

Also included, dont know why, is a long cap with space for two M3 nuts and screws. I believe this can be usefull to align the tensioner in case of need.

Print Settings

Printer:

Graber i3

Rafts:

No

Supports:

No

Resolution:

1,5

Infill:

i used 30, but 20 or 15 should be ok

Filament:

n/a abs

n/a


Notes:

if you print fast engouth (i printed mine about 60mm/s) you wont need suports

Category: 3D Printer Parts

Tags