Replacement bottom insulator for Hustler 4BTV / 5BTV / 6BTV vertical antennas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement bottom insulator for Hustler 4BTV (and 5BTV, 6BTV, etc) ham radio vertical antenna.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original insulators on the Hustler vertical antennas become brittle over time and may break. This is a very close approximation of the original bottom / base insulator. I did not include the outer three screw holes as it's difficult to measure. Instead I simply held the insulator up to the antenna, used a marker to mark the correct locations, and drilled holes for these three. Other than that, it should pretty much be a drop-in replacement.
Designed from scratch in TinkerCAD, using pieces of the original broken insulator and a pair of calipers to take measurements. Printed in PETG at 50% infill.