Shimano road bike disc brake bleed block (openscad)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of PhyMaus's design. I added two grooves and decreased the block width so it could be used with Shimano road…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 316
- Wydruki
- 2
- Wyświetlenia
- 1495
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Remix of PhyMaus's design.
I added two grooves and decreased the block width so it could be used with Shimano road disc brakes like the Shimano 105 BR-R7070 calipers.
My remix is meant to mimic the Shimano bleed block design - part number Y8N219000 (shown in yellow).
The grooves are there because these calipers have a screw fixing pin which protrudes into the space in front of the brake gap. shimano brake specs - #19 is the screw pin
I took a picture of the protruding pin and attached it to this design. Without the grooves the bleed block won't fit in because that pin gets in the way.
Tip from PhyMaus - if your brakes don't retract all the way, try printing it 9mm or 8mm thick, instead of the default 10mm.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
80
Filament: eSun PLA
Category: Sport & Outdoors