Shimano road bike disc brake bleed block (openscad)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of PhyMaus's design. I added two grooves and decreased the block width so it could be used with Shimano road…
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 317
- Makes
- 2
- Views
- 1,500
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Remix of PhyMaus's design.
I added two grooves and decreased the block width so it could be used with Shimano road disc brakes like the Shimano 105 BR-R7070 calipers.
My remix is meant to mimic the Shimano bleed block design - part number Y8N219000 (shown in yellow).
The grooves are there because these calipers have a screw fixing pin which protrudes into the space in front of the brake gap. shimano brake specs - #19 is the screw pin
I took a picture of the protruding pin and attached it to this design. Without the grooves the bleed block won't fit in because that pin gets in the way.
Tip from PhyMaus - if your brakes don't retract all the way, try printing it 9mm or 8mm thick, instead of the default 10mm.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
80
Filament: eSun PLA
Category: Sport & Outdoors