Topeak QuickTrack MTX rack wedge mounted to milk crate with zipties (openscad)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1621
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes for zipties (sort of like this approach https://www.youtube.com/watch?v=MvBx_74FzUk).
I haven't looked at jridley's clip design yet. This remix is just for the wedge so that I could mount a milk crate on my topeak rack and secure it with a bungie cord.
I printed a small version first to get the dimensions of the wedge right for my rack. This will probably vary for everyones 3D printer (in terms of calibration) & also the racks will probably vary slightly.
I printed in PLA, 0.28mm layer height, with 30% infill. I used zipties across the designed slats, and then I drilled holes with a 3/16" bit so that I could also mount zipties going in the other direction to prevent forward/back movement.
The print took a while, and one of the edges peeled off the corner of the bed. This means that I can't slide the rack all the way in because the backside is a little messed up. Be sure to print with glue, or keep your bed heated throughout the print to avoid warping.
Category: Sport & Outdoors
--
Please excuse poor code / variable naming. Didn't want to spend more time on this but figured someone might still find it useful in this condition.