1 / 5
Topeak QuickTrack MTX rack wedge mounted to milk crate with zipties (openscad) — image 1
1 / 5

Topeak QuickTrack MTX rack wedge mounted to milk crate with zipties (openscad)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes…

Rating
5 / 5
Likes
33
Downloads
127
Makes
0
Views
1,614
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes for zipties (sort of like this approach https://www.youtube.com/watch?v=MvBx_74FzUk).

I haven't looked at jridley's clip design yet. This remix is just for the wedge so that I could mount a milk crate on my topeak rack and secure it with a bungie cord.

I printed a small version first to get the dimensions of the wedge right for my rack. This will probably vary for everyones 3D printer (in terms of calibration) & also the racks will probably vary slightly.

I printed in PLA, 0.28mm layer height, with 30% infill. I used zipties across the designed slats, and then I drilled holes with a 3/16" bit so that I could also mount zipties going in the other direction to prevent forward/back movement.

The print took a while, and one of the edges peeled off the corner of the bed. This means that I can't slide the rack all the way in because the backside is a little messed up. Be sure to print with glue, or keep your bed heated throughout the print to avoid warping.

Category: Sport & Outdoors

--

Please excuse poor code / variable naming. Didn't want to spend more time on this but figured someone might still find it useful in this condition.

Tags