1 / 6
Pet Door with 4-Way Latch & Magnetic Door Return V1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pet door that you can set to fully-open, fully-locked, in-only, or out-only. Magnets ensure the door always closes fully
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (56)Powiązane
NEW AND IMPROVED MODEL: Pet Door with 4-Way Latch & Magnetic Door Return V2 by jabbanman | Download free STL model | Printables.com
Inspiration comes from https://www.thingiverse.com/thing:4166823
Features:
- 4-way selection knob to set 1) both ways open 2) both ways closed 3) exit only, and 4) enter only
- Magnets inside the frame/door to fully close the door and prevent gusts of wind from blowing the door open
- Water resistant with an outside drain hole from the latch mechanism cavity
- Designed for a 16mm thick wall (I purchased a shelf from Home Depot and put it vertically into a sliding door track)
Printed Materials:
- 1 x Frame_Outside
- 1 x Frame_Inside
- 1 x Door_A
- 1 x Door_B
- 2 x Latch
- 1 x Shaft
- 2 x Dial
Purchased Materials
- 4 x M3x8 up to M3x14
- 2 x M3x12 up to M3x16
- 6 x M3 square nut
- 40 x 4.8x9.5x2.8mm magnet
- 2 x Bic Ball Point Pen Spring
- 1 x 138x138x2.8mm acrylic sheet