1 / 6
Pet Door with 4-Way Latch & Magnetic Door Return V1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pet door that you can set to fully-open, fully-locked, in-only, or out-only. Magnets ensure the door always closes fully
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 103
- Makes
- 0
- Views
- 1,240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
NEW AND IMPROVED MODEL: Pet Door with 4-Way Latch & Magnetic Door Return V2 by jabbanman | Download free STL model | Printables.com
Inspiration comes from https://www.thingiverse.com/thing:4166823
Features:
- 4-way selection knob to set 1) both ways open 2) both ways closed 3) exit only, and 4) enter only
- Magnets inside the frame/door to fully close the door and prevent gusts of wind from blowing the door open
- Water resistant with an outside drain hole from the latch mechanism cavity
- Designed for a 16mm thick wall (I purchased a shelf from Home Depot and put it vertically into a sliding door track)
Printed Materials:
- 1 x Frame_Outside
- 1 x Frame_Inside
- 1 x Door_A
- 1 x Door_B
- 2 x Latch
- 1 x Shaft
- 2 x Dial
Purchased Materials
- 4 x M3x8 up to M3x14
- 2 x M3x12 up to M3x16
- 6 x M3 square nut
- 40 x 4.8x9.5x2.8mm magnet
- 2 x Bic Ball Point Pen Spring
- 1 x 138x138x2.8mm acrylic sheet