Bicycle Rear Pannier Basket Quick Release Mechanism (Tortec Tour Ultralite Rear Rack)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick, simple print, to attach an arbitrary object to a rear bicycle rack (Tortec Tour Ultralite Rear Rack)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Designed for the Tortec Tour Ultralite Rear Rack and an old plastic box. Print out of PLA has worked so far for me.
This uses:
- 6x M3 machine screws (depending on how thick the box is, I used 20mm).
- 6x M3 locking nuts
- 12xM3 washers
- About 30cm of 4mm bungee cord
I printed with an 0.6mm nozzle & 0.3mm layer height, and no supports, but it's a simple chuky, functional model. You could do anything you like.
Box releases from rack in about 5 seconds, and it takes about 10 seconds to put on. I have tested it under moderate loads and speeds for the past couple of weeks.
Concept valid and could be adapted to fit random things to other racks.