1 / 5
Bicycle Rear Pannier Basket Quick Release Mechanism (Tortec Tour Ultralite Rear Rack)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick, simple print, to attach an arbitrary object to a rear bicycle rack (Tortec Tour Ultralite Rear Rack)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 716
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Designed for the Tortec Tour Ultralite Rear Rack and an old plastic box. Print out of PLA has worked so far for me.
This uses:
- 6x M3 machine screws (depending on how thick the box is, I used 20mm).
- 6x M3 locking nuts
- 12xM3 washers
- About 30cm of 4mm bungee cord
I printed with an 0.6mm nozzle & 0.3mm layer height, and no supports, but it's a simple chuky, functional model. You could do anything you like.
Box releases from rack in about 5 seconds, and it takes about 10 seconds to put on. I have tested it under moderate loads and speeds for the past couple of weeks.
Concept valid and could be adapted to fit random things to other racks.