1 / 3
Bike - Jack the Rack 35mm Bar Shim (TPU) — zdjęcie 1
1 / 3

Bike - Jack the Rack 35mm Bar Shim (TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shim for the "Jack the Rack" to fit with 35mm diameter bars.

Ocena
5 / 5
Polubienia
17
Pobrania
128
Wydruki
1
Wyświetlenia
1748
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A shim for the “Jack the Rack” handlebar mounted bike rack to fit on 35mm diameter handlebars.

Jack the Rack (https://wholegraincycles.com)

I have tried a design for PETG that allowed the rack to snap into place.  This design required print orientations that would inevitably be weak in some direction, either snapping onto the bars or the rack into the shim.  I opted for a shallow design out of hard TPU which allowed for printing laying down with no supports.

Print Settings:

  • Filament: TPU 95A
  • No supports

Tagi