Toyzuki v2 v2.5 low rock sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are Rock sliders for the Toyzuki v2 and 2.5. They sit lower then the previous sliders I have made. Youtube Video…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are Rock sliders for the Toyzuki v2 and 2.5. They sit lower then the previous sliders I have made.
Youtube Video https://youtu.be/JaMNlem1ttY
Ugly video https://youtu.be/P-q0k2z9Xbc
The nice thing about these is they are totally smooth, so you don't hang up on the rocks as much, yes?
Well I have no Idea, I haven't printed them, I don't own a rc4wd Mojave body to try them on, that's why you have to drill your own holes for the cab.
You also need to drill a hole in the chassis near the front upper links.
If your upper links hit this screw you need to add some washers to the links to move them out I guess.
Probably going to need to print with supports, I suggest printing at a 45 degree angle for strength, but you know your printer better then me. Probably use Petg or better to, PLA is to brittle I bet.
No Idea, not my problem.
Category: R/C Vehicles