1 / 2
Wheel hubs nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a car and didn't have any 4mm nuts so i made these, maybe use some locktite on them. Hole is undersized, I used…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a car and didn't have any 4mm nuts so i made these, maybe use some locktite on them. Hole is undersized, I used a tap to thread them, but you can use a drill.
Category: R/C Vehicles