1 / 2
Wheel hubs nuts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a car and didn't have any 4mm nuts so i made these, maybe use some locktite on them. Hole is undersized, I used…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a car and didn't have any 4mm nuts so i made these, maybe use some locktite on them. Hole is undersized, I used a tap to thread them, but you can use a drill.
Category: R/C Vehicles